welcome to Steel N Alloys

Application :
Machined Components, Pump Shafts, Valves, Fasteners, Machine Tools, Dairy Equipments, Surgical & Medical Parts, Threaded Bars, Studs, Bolts, Pins, Hinges and Handles.

Condition	Cold Drawn & Polished	Cold Drawn, Centreless Ground & Polished	Cold Drawn, Centreless Ground & Polished (Strain Hardened)
Grades	202, 303, 304, 304L, 310, 316, 316L, 32, 410, 420, 416, 430, 431, 430F & others		304, 304L, 316, 316L
Diameter (Size)	2 mm to 5mm (1/8" to 3/16")	6mm to 22m (1/4" to 7/8")	10mm to 40mm (3/8" to 1-1/2")
Diameter Tolerance	h9 (Din 671),h11 ASTM A 484	h9 (Din 671) ASTM A 484	>h9 (Din 671),h11 ASTM A 484
Length	3/4/5.6/6 meter (12/14ft/20feet)	3/4/5.6/6 meter (12/14ft/20feet)	3/4/5.6/6 meter (12/14ft/20feet)
Length Tolerance	-0/+200mm or +100mm or +50mm (-0 ”/+1 feet or +4 ” or 2 ”)	-0/+200mm or +100mm or +50mm (-0 ”/+1 feet or +4 ” or 2 ”)	-0/+200mm (-0 ”/+1 feet)

We can give Chamfering of 30 or 45 degrees on one or both the ends with our dedicated chamfering machine. For Strain-Hardened Bars, we can supply in B8(304) and B8M(316) in Class1 and Class2.

Round Bars (Peeled / Turned)

Condition	Peeled, Centreless Ground & Polished	Peeled & Polished	Peeled (Rough Turned)	Forged, Rough Turned
Grades	20, 202, 303, 304, 304L, 310, 316, 316L, 321, 410, 420, 416, 430, 431, 430F & others		304, 304L, 316, 316L, 410, 416, 420, 431	303, 304, 304L, 316, 316L, 410, 416, 420, 431
Diameter (Size)	20mm to 85mm (3/4 ” to 3--1/4 ”)	85mm to 140mm (3-1/4 ” to 4--3/4 ”)	25mm to 140mm (1 ” to 5--1/2 ”)	150mm to 400mm (6 ” to 16 ”)
Diameter Tolerance	h9 (Din 671) ASTM A 484	h11	K12/K13 (Din 1013)	-0mm/+3mm (-0 ”/+0.12 ”)
Length	3/4/5.6/6 meter (12/14ft/20feet)	3/4/5.6/6 meter (12/14ft/20feet)	3/4/5.6/6 meter (12/14ft/20feet)	3 meter -5 meter 10 feet -16 feet
Length Tolerance	-0/+200mm or +100mm or +50mm (-0 ”/+1 feet or +4 ” or 2 ”)	-0/+200mm or +100mm or +50mm (-0 ”/+1 feet or +4 ” or 2 ”)	-0/+1000mm or 500mm (-0 ”/+3 feet or +2 feet)	-0/+2 meter- -0/+6 feet

We can give superior surface finish and straightness tolerance for Pump Shaft Quality by additional processes such as straightening,roller burnishing,and centreless grinding.Bars can be packed in wooden boxes,with each bar protected with plastic rings to avoid bending and scratches.

Hex & Square Bars

Applications:
Ball Valves, Needle Valves, Filter Valves, Connectors, Couplings, Plugs, Hose Ends, Manifolds, Nuts, Bolts.

Type	Cold Drawn & Polished (Squares)	Cold Drawn & Polished (Hexagons)
Grades	304,304L,316,316L	304,304L,316,316L
Diameter (Size)	5mm to 40mm (1/4 ” to 1--1/2 ”)	10mm to 40mm (3/8 ” to 1--1/2 ”)
Diameter Tolerance	h11 (ASTM A 484)	h11 (ASTM A 484)
Length	3/4/6 meter (12/14ft/20feet)	3/4/6 meter (12/14ft/20feet)
Length Tolerance	-0/+500mm (-0 ”/+2 feet)	-0/+500mm (-0 ”/+2 feet)

Black Bars (Hot Rolled & )

Applications :
Forged Flanges, Forged Fittings, Pump Shafts, Spindles, Machine Tools, Valves, Seals, Dairy Equipments, Parts of Printing Press

Condition	Hot Rolled, Decoiled from Coils	Hot Rolled
Grades	303, 304, 304L, 316, 316L, 410, 416, 420, 431
Diameter (Size)	10 mm to 24 mm	25 mm to 150 mm
Length	3 to 6 meter	3 to 6 meter
Heat Treatment	Annealed / Solution Annealed / Quenched & Tempered / Hardened &Tempered

Blooms, Billets & RCS

Applications :
Round Bars and Wire Rods by Rolling, Forged Bars, Forged Flanges by Forging

Condition	Concast Blooms	Concast Billets	Round Corner Squares (RCS)
Grades	303, 304, 304L, 316, 316L, 410, 416, 420, 431
Size	160x160 & 250x 250	100x100 & 1 20x120	50 to 140 mm
Surface	As Cast	As Cast, Spot Ground, Fully Ground	As Rolled

Threaded Bars

Applications :
Ground Anchors, Resin Anchors, Rock Bolts, Tie Bars, Roof and Hanger Bolts.

Condition	Cold Drawn,Threading
Grades	304,304L,316,316L
Diameter (Size)	M8 to M40 (5/16 ” to 1--1/2 ”)
Threading Method	Thread Rolling
Threading Condition	Fully Threaded
Thread Type	ANSI B1.1 Class 2A Fit
Length	2/3/4 meter(6/12ft )
Length Tolerance	-0 /+50 mm (-0 ”/+2 ” )